Enabling Logging on CSG

[Pepperami]

To enable logging on CSG navigate to the following registry entry and make the changes dependant on the logging level you require. As a default it is set to 2

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CtxSecGwy\Global\LogLevel

REG_DWORD = 0 (Fatal events only)

Valid values for LogLevel are:

0 – Fatal events only
1 – Error and fatal events
2 – Warning, error and fatal events
3 – All events including informational

ON a side note if you're not seeing connections come up in session information on the secure gateway server this is probably because you havent setup the WI correctly. It needs to be changed in the DMZ settings to be Secure Gateway Direct and not the default of Direct. It will still appear to connect OK and work but nothing will show in the session information on the CSG server this is because the WI isnt sending the inforamtion back to connect via the CSG server. Change this setting and session information will now show up for connected users confirming it is working correctly